Installation, servicing and user operating instructions for the AGA Ellesmere ECGW balanced flue natural gas stove, for use in GB and IE.
This document is the installation, servicing and user operating instructions for the Ellesmere Wide Model ECGW balanced flue gas stove, identified in the text as an AGA Stoves appliance burning Natural Gas and intended for use in GB and IE (United Kingdom and Ireland). It carries document number RH/TESC/SIN/BUR/NG, issued 03/01/2020, and is addressed to both the Gas Safe registered installer and the end user.
The manual opens with installation requirements, including a minimum 15mm gas feed pipe, an ON/OFF tap with pressure test point, the rear chain kit and flue locking screws, then covers user instructions, controls and remote handset, batteries, installation and flue connection, log layout, commissioning, servicing and technical data. Appendices provide a commissioning checklist, annual servicing records and the energy efficiency label. Technical data quotes a maximum heat output of 5.83 kW on high flame, 81% efficiency and a European Energy Label rating of "A".
| Fuel type | Natural Gas |
|---|---|
| Maximum heat output (high flame, NG) | 5.83 kW |
| Efficiency | 81% |
| European Energy Label rating | "A" |
| Minimum gas feed pipe diameter | 15 mm |
| Gas inlet pipe fitting | 8 mm compression fitting |
| Minimum distance for curtains, laundry and furniture (hot zone) | 1000 mm |
| Flue fixing | 2 flue locking screws in the flue collar |
The stove is a Natural Gas appliance; the manual states the fuel type as Natural Gas.
The technical data lists a maximum heat output on high flame (NG) of 5.83 kW, with 81% efficiency.
The installer must be Gas Safe qualified and registered for Natural Gas and hold the HTR 1 category on their Gas Safe register listing.
The appliance must be isolated by turning off the gas at the ON/OFF isolation tap fitted at the rear or side of the stove.
No attempt should be made to relight within 3 minutes, to allow the thermocouple to reset.