The 6WMMC7 Series motherboard supports features such as Suspend‑to‑RAM, hardware monitoring, PS/2 mouse and keyboard power‑on, three‑stage ACPI LED, modem and network remote power‑on, AC97 audio, TV/DFP output, and optional Aureal AU8810 audio chip. This guide provides step‑by‑step instructions for installing the board, configuring jumpers, and setting CPU frequencies.
Quick installation sections cover CPU speed selection via JP5/JP23 jumpers, connector pin‑outs for power, reset, speaker, PS/2, USB, and infrared ports, as well as an appendix for installing the AU8810 driver and compliance statements. This manual is written in Chinese.
| Suspend to RAM support | Supported |
|---|---|
| Hardware monitoring | Supported |
| PS/2 mouse power‑on | Supported |
| Keyboard power‑on | Supported with ATX 5V Stand‑By ≥300 mA |
| Three‑stage ACPI LED | Supported |
| Modem power‑on | Supported (internal and external COMA) |
| Network remote power‑on | Supported (ATX 5V Stand‑By ≥720 mA) |
| AC97 audio | Built‑in |
| TV/DFP output | Optional via sub‑card |
| Aureal AU8810 audio chip | Optional |
| CPU frequency settings | 66 MHz, 100 MHz, 133 MHz, Auto (via JP5/JP23) |
Press the left or right button of the PS/2 mouse twice after enabling the PS/2 mouse power‑on option in the BIOS.
Use jumpers JP5 and JP23 to select 66 MHz, 100 MHz, 133 MHz, or Auto settings for the system clock.
An ATX power supply that provides at least 300 mA on the 5 V Stand‑By line and the BIOS keyboard power‑on option enabled.