This document is a service manual for the 45 series E-type open axial piston pump, which provides information on installation, technical specifications, features, startup steps, hydraulic oil and filter maintenance, troubleshooting, and preliminary repairs.
This manual covers the 45 Series E open‑type axial piston pump, describing its design, operation principles, and the hydraulic system it powers. It includes safety alerts for slip hazards, flammable cleaning agents, and pressurised oil, as well as guidance on cleaning and handling.
The document details system schematics, technical specifications, installation flange options, control choices (PC and LS), oil parameters, torque settings, troubleshooting, and step‑by‑step repair procedures for seals, valves and control modules. This manual is written in Chinese.
| Maximum displacement | 100 cm³ (E100B), 130 cm³ (E130B), 147 cm³ (E147C) |
|---|---|
| Rated flow at rated speed (theoretical) | 245 L/min (E100B), 286 L/min (E130B), 309 L/min (E147C) |
| Maximum input torque (theoretical) | 1.592 N·m/bar (E100B), 2.069 N·m/bar (E130B), 2.340 N·m/bar (E147C) |
| Weight | 51.3 kg (axial outlet), 54.9 kg (radial outlet) |
| Minimum suction pressure (continuous) | 0.8 bar |
| Operating temperature range | -40 °C (cold start) – 82 °C (continuous) – 104 °C (max) |
Operators must prevent machine slip, avoid using flammable cleaning agents, and handle pressurised oil with protective eyewear to avoid injury.
The pump can be equipped with Pressure Compensation (PC) control or Load‑Sensitive (LS) control, the latter optionally combined with PC.
Four control‑valve bolts (C300) are tightened to a torque of 5.4 – 7.5 N·m in a diagonal sequence, then re‑checked.
Typical torque values range from 10.8 – 13.5 N·m for 3/16‑inch bolts and 5.4 – 7.5 N·m for 4‑mm bolts, as listed in the torque table.