The Alienware OptX™ AW2210 User Guide provides detailed information about the display, including the package contents, product features, parts and controls, display specifications, Universal Serial Bus (USB) interface, Plug and Play capability, and maintenance instructions.
This user guide covers the Alienware OptX AW2210 monitor. It was published by Dell Inc. in August 2009 (Rev. A03) and is divided into sections on about your monitor, setting up the monitor, operating the monitor, troubleshooting and an appendix, with notes, cautions and warnings explained at the start.
The AW2210 has a 21.5-inch viewable area with a maximum resolution of 1920 x 1080 at 60 Hz, a TN panel, 300 cd/m² typical brightness and 2 ms typical gray-to-gray response time. Connectors include two HDMI ports, a DVI port, audio input and output, one USB upstream port and four USB downstream ports. The stand offers tilt, swivel and height extension, the back provides 100 mm VESA mounting holes and a security lock slot, and the guide also describes the front-panel shortcut keys, the on-screen display menu and the built-in self-test and diagnostics. This manual is written in Chinese.
| Screen size | 21.5 inches (21.5 in viewable image size) |
|---|---|
| Panel type | TN |
| Maximum resolution | 1920 x 1080 at 60 Hz |
| Brightness | 300 cd/m² (typical) |
| Contrast ratio | 1000:1 (typical); dynamic contrast ratio up to 80,000:1 |
| Response time | 2 ms typical (gray to gray) |
| Viewing angle | 160° vertical typical, 170° horizontal typical |
| Power consumption | 45 W typical / 75 W maximum |
| AC input | 100 to 240 VAC / 50 or 60 Hz |
| Weight with stand and cables | 13.05 lbs (5.92 kg) |
The monitor supports a maximum resolution of 1920 x 1080 at 60 Hz, with a horizontal scan range of 30 kHz to 83 kHz and a vertical scan range of 56 Hz to 75 Hz.
It has a power connector, two HDMI connectors, a DVI connector, audio input and output connectors, one USB upstream port and four USB downstream ports.
With the screen clean, unplug the video cable so the monitor enters self-test mode, then press and hold the A and D buttons on the front panel for 2 seconds; a gray screen appears for checking.
Use a UL-listed wall-mount bracket with a minimum weight/load capacity of 4.36 kg; the monitor has 100 mm VESA mounting holes.