Dell Networking W-IAP103 Instant Access Point Installation Guide

The Dell Networking W-IAP103 Instant Access Point supports the IEEE 802.11n standard for high-performance WLAN. The access point uses MIMO (Multiple-Input, Multiple-Output) technology and other high-throughput mode techniques to deliver high-performance, 802.11n 2.4 GHz or 5 GHz functionality while simultaneously supporting existing 802.11a/b/g wireless services.


Dell Networking W-IAP103 Instant Access Point Installation Guide - cover page
Brand
DELL
Category
Other network devices
Document type
Installation Guide
Language
English
Pages
2
File format
PDF
File size
624 KB
Published
26 November, 2023
Updated
26 November, 2023
MD5 checksum
35A51CF3B9716C95E995096E38D02666

About this manual

This installation guide covers the Dell Networking W-IAP103 Instant access point, an IEEE 802.11n access point using MIMO technology for 2.4 GHz or 5 GHz operation while supporting existing 802.11a/b/g services. It works only in conjunction with a virtual controller and includes hardware overview, LED descriptions, port details, reset instructions, pre-installation requirements, and mounting steps.

The guide also provides a ceiling rail mounting procedure, an LED behavior table, Ethernet pin-out information, DC power specifications, and regulatory compliance cautions. Configuration details are referenced to the Dell Networking W-Series Instant Quick Start Guide and User Guide.

What's inside

  • Package Contents
  • W-IAP103 Hardware Overview
  • LEDs
  • Console Port
  • Ethernet Port
  • DC Power Socket
  • Reset Button
  • IAP Pre-Installation Checklist
  • Summary of the Setup Process
  • Installing the IAP Using the Ceiling Rail Adapter

Specifications

Wireless standardIEEE 802.11n with MIMO technology
Frequency bands2.4 GHz or 5 GHz
Ethernet port10/100/1000Base-T (RJ-45), auto-sensing, MDI/MDX
Power over EthernetIEEE 802.3af compliant; accepts 48 VDC (nominal)
DC power input12 VDC (+/-5%)/18W
DC plugCenter-positive 1.7/4.0 mm circular plug, 9.5 mm length
LEDsFour LEDs: PWR, ENET, 5 GHz, and 2.4 GHz
Ceiling rail adapters9/16 inch and 15/16 inch adapters included
Software requirementDell Instant 4.1 or later
Console port4-pin connector covered by a dust cover

Frequently asked questions

What power sources can be used for the W-IAP103?

An 802.3af-compliant PoE source, the Dell AP AC-DC adapter kit (sold separately), or a locally sourced AC-to-DC adapter meeting the stated DC specifications.

How do I reset the W-IAP103 to factory defaults?

Power off the IAP, press and hold the reset button, power on without releasing it until the power LED flashes, then release; the power LED flashes again within 15 seconds.

Does the W-IAP103 work by itself?

No, it works only in conjunction with a virtual controller.

What does a steady green PWR LED indicate?

The IAP is ready.

Download PDF (624 KB)

More DELL Manuals


View all DELL manuals →