The document provides a getting started guide for Dell computers, including the hardware and software features of the system, and how to set up and use the system.
This guide describes the major hardware and software features of the Dell AMP01 rack-mount storage enclosure and explains how to set it up for the first time. It covers unpacking, installing the rails and system in a rack, connecting power cables, attaching the power cord retention bracket, turning on the system, and installing the bezel.
Technical specifications cover supported SAS and SATA hard drives, unified and split connectivity configurations, enclosure management modules, backplane and rear-panel connectors, LED indicators, power supply ratings, and physical dimensions.
| SAS hard drive capacity | Up to 15 1-inch-by-3.5-inch SAS hot-plug hard drives (3.0 Gbps) at 10K or 15K rpm |
|---|---|
| SATA hard drive capacity | Up to 15 1-inch-by-3.5-inch SATA hot-plug hard drives (3.0 Gbps) at 7.2K rpm |
| Enclosure management modules | 1 or 2 modules |
| Maximum continuous power | 488 W |
| Power supply voltage | 100–240 V rated (actual 90–264 V) |
| Power supply frequency | 47–63 Hz |
| Amperage | 7.2 A at 100 V, 3.6 A at 200 V |
| Height | 13.11 cm (5.16 inches) |
| Width | 44.63 cm (17.57 inches) |
| Depth | 48.01 cm (18.9 inches) |
| Maximum configuration weight | 35.37 kg (78 lb) |
It supports up to 15 hot-plug 3.0 Gbps SAS hard drives at 10K or 15K rpm, or up to 15 hot-plug 3.0 Gbps SATA hard drives at 7.2K rpm.
Connect both power cables to the power supply/cooling fan modules, attach the retention bracket, and plug the other ends into a grounded outlet or a separate power source such as a UPS or PDU.
Read and follow the safety instructions and regulatory information in the Product Information Guide, and turn off the host server before installing and configuring the system.
Unified mode provides direct connectivity to 15 hard drives, while split mode with dual EMMs connects drives 0 through 6 on one EMM and drives 7 through 14 on the second EMM.