Dell™ PowerVault™ MD1220 Storage Enclosures Getting Started With Your System
This guide helps you install and configure the Dell PowerVault MD1220 storage enclosure. It covers unpacking, rack installation, power connection, system startup, and optional bezel installation. Technical specifications include support for up to 24 SAS drives, unified or split mode operation, and RAID management via Dell OpenManage.
Safety warnings and regulatory information are included, along with details on power supplies, connectors, LEDs, and EMM modules. The document also references additional resources like the Hardware Owner’s Manual and online support at support.dell.com/manuals.
| Drives | Up to 24 2.5-inch SAS hot-swappable hard drives (3.0 Gbps and 6.0 Gbps) |
|---|---|
| Enclosure Management Modules (EMMs) | One or two hot-swappable modules with temperature sensors and an audio alarm |
| Connectivity Configurations | Unified mode for direct connectivity to 24 hard drives per enclosure |
| Maximum Drives per Server | 384 drives |
| Power Supply Wattage | 600 W |
| Voltage | 100–240 VAC |
| Maximum Inrush Current | 55 A per power supply for 10 ms or less |
| Supported Hard Drive Power (Continuous) | Up to 1.2 A at +5 V, Up to 0.5 A at +12 V |
| EMM Maximum Power Consumed | 14 W at +12 V |
| Maximum Available Power (EMM) | 100 W at +12 V, 1 W at +5 V (standby) |
It supports up to 24 2.5-inch SAS hot-swappable hard drives (3.0 Gbps and 6.0 Gbps).
The enclosure supports up to 24 2.5-inch SAS hot-swappable hard drives.
It should be set to split or unified mode, with the enclosure connected to the server.
Each AC power supply is rated at 600 W.