The Dell UltraSharp 24 monitor features a 23.8-inch IPS panel with a resolution of 1920 x 1080 and a refresh rate of 60Hz. It has a 1000:1 contrast ratio and a brightness of 300 nits. The monitor also has an anti-glare coating to reduce glare.
Dell UltraSharp 24 monitor models U2422H, U2422HX and U2422HE are 23.8-inch active-matrix TFT LCD monitors with LED backlighting and 1920 x 1080 resolution. The guide describes package contents, parts identification, specifications, connection options, stand adjustment, OSD menus, KVM and multi-monitor features, and troubleshooting.
The U2422HE adds USB-C upstream video and data with up to 90 W power delivery, RJ45 networking, KVM switching and USB-C MST support, while U2422H/U2422HX provide USB-C upstream data and DisplayPort or HDMI video connections. The document also covers cleaning, VESA mounting, firmware updates and common USB connection issues. This manual is written in Italian.
| Display type | Active-matrix TFT LCD with LED backlight |
|---|---|
| Visible area | 60.47 cm (23.80 inches), measured diagonally |
| Resolution | 1920 x 1080 (16:9) |
| Color gamut | sRGB 100%, Rec. 709 100%, DCI-P3 85%; average Delta E < 2 |
| Standby power | <0.3 W |
| VESA mounting | 100 mm |
| USB ports (U2422H/U2422HX) | 1 USB-C upstream (data only, USB 3.2 Gen2, 10 Gbps), 2 USB 10 Gbps Type A downstream, 1 USB 10 Gbps Type A downstream charging, 1 USB 10 Gbps Type C downstream |
| USB ports (U2422HE) | 1 USB-C upstream (video and data; DP1.4 with Alt Mode, PD up to 90 W), 1 USB-C upstream (data only, USB 3.2 Gen2, 10 Gbps), 3 USB 10 Gbps Type A downstream, 1 USB 10 Gbps Type A downstream charging, 1 USB 10 Gbps Type C downstream |
Check the signal source, make sure the computer is not in standby, verify the signal cable is connected properly, and restart the computer or video player.
Different video formats (aspect ratios) of DVDs may prevent full-screen display; run the built-in diagnostics.
Make sure the monitor is on, reconnect the upstream cable and USB peripherals, power-cycle the monitor, and restart the computer.
Verify the connected device conforms to USB-C specifications, that the port supports USB 3.2 Gen2 and 90 W output, and use only the supplied USB-C cable.