The Dell S2415H is a 24-inch LCD monitor with a resolution of 1920x1080 and a response time of 8ms. It has VGA and DVI inputs and supports wall mounting.
This is the user guide for the Dell S2415H flat-panel monitor (regulatory model S2415Hb), published by Dell Inc. (Rev. A03, 2015-11). The S2415H is a 23.8-inch active matrix TFT LCD display with an IPS panel, LED backlight, 1920 x 1080 resolution, and built-in 2 x 3 W speakers. It provides HDMI (MHL) and VGA inputs, a headphone port, tilt adjustment, and VESA 100 mm mounting holes.
The guide lists the package contents and product features, identifies the parts and controls, and gives the monitor specifications. It then walks through attaching the stand, connecting cables, installing the cable cover, and optional wall mounting, followed by operating the monitor via the front-panel controls and the OSD menu, setting the maximum resolution, and using the tilt function. A troubleshooting section covers the self-test, built-in diagnostics, common and product-specific problems including MHL and speaker issues, and an appendix covers regulatory information and contacting Dell. This manual is written in Chinese.
| Screen type | Active matrix - TFT LCD |
|---|---|
| Panel type | In-plane switching (IPS) |
| Viewable area (diagonal) | 604.70 mm (23.8 inch) |
| Maximum preset resolution | 1920 x 1080 at 60 Hz |
| Pixel pitch | 0.2745 mm x 0.2745 mm |
| Brightness | 250 cd/m2 typical |
| Contrast ratio | 1000 to 1 typical (8M to 1 with dynamic contrast) |
| Response time | 6 ms typical with Overdrive |
| Color depth | 16.7 million colors |
| Backlight | LED edge-lit system |
| Power adapter output | 19.5 VDC / 3.34 A |
| Weight with stand and cables | 4.72 kg (10.41 lb) |
Check the signal source by moving the mouse or pressing a keyboard key to make sure the computer is not in power-saving mode, and check that the signal cable is properly connected.
Check that the audio cable is correctly connected to the computer's audio output port, unplug the headphone plug from the headphone port, and reset the monitor to factory settings.
Confirm that the MHL cable and device are MHL certified, that the device is on and not in standby, and that the input source selected in the OSD menu matches the HDMI (MHL) connection. Wait 30 seconds after connecting, since some MHL devices need a longer recovery time.
Press and hold the button next to the power button for 10 seconds to unlock it.