The Dell UltraSharp UZ2215H/UZ2315H/UZ2715H User's Guide provides information on how to use the display.
Dell UltraSharp UZ2215H, UZ2315H, and UZ2715H are 21.5-inch, 23-inch, and 27-inch active-matrix TFT LCD monitors with 1920 x 1080 resolution, LED backlight, and PLS wide-angle panels. The guide covers package contents, parts and controls, specifications, plug-and-play and USB features, and maintenance.
It also explains stand and cable setup, wall mounting, power-on and front-panel/OSD operation, tilt/swivel/pivot adjustments, self-test and diagnostics, common and device-specific troubleshooting, and appendix information including FCC/regulatory notes and China energy efficiency labels. This manual is written in Chinese.
| Screen type | Active matrix - TFT LCD |
|---|---|
| Panel type | PLS (Plane to Line Switching) wide-angle panel |
| UZ2215H display area | 54.61 cm (21.5 in) diagonal |
| UZ2315H display area | 58.42 cm (23.0 in) diagonal |
| UZ2715H display area | 68.58 cm (27.0 in) diagonal |
| Pixel pitch (UZ2215H) | 0.248 mm x 0.248 mm |
| Pixel pitch (UZ2315H) | 0.265 mm x 0.265 mm |
| Pixel pitch (UZ2715H) | 0.3114 mm x 0.3114 mm |
| Viewing angle | 178° vertical and 178° horizontal (typical) |
| Brightness | 250 cd/m² (UZ2215H); 300 cd/m² (UZ2315H/UZ2715H), typical |
| Contrast ratio | 1000:1 typical; 8,000,000:1 dynamic contrast |
| Panel coating | Anti-glare 3H hard coating |
| Backlight | LED backlight system |
| Response time | 8 ms (GTG) with Overdrive |
| Color depth | 16.7 million colors |
| Color gamut | CIE1976 83% (UZ2215H/UZ2315H) or 88% (UZ2715H); CIE1931 72% |
| Horizontal scan range | 30 kHz - 83 kHz (automatic) |
| Vertical scan range | 56 Hz - 76 Hz (automatic) |
| Maximum preset resolution | 1920 x 1080 at 60 Hz |
| Supported video modes | 480p, 480i, 576p, 720p, 1080p, 576i, 1080i |
| Video input signals | Analog RGB 0.7 V ±5%; DisplayPort 600 mV per differential line; HDMI (MHL) 600 mV per differential line |
| Sync input | Separate horizontal/vertical sync, TTL level, SOG |
| AC/DC adapter input | 90-264 VAC, 50-60 Hz, 1.5 A RMS at 90 VAC / 0.8 A RMS at 180 VAC |
| Adapter output | 19.5 V / 4.62 A |
| Inrush current | 150 A maximum at 115 V/230 V |
| Adapter model | Dell Lite-On LA90PM111 |
| UZ2315H energy efficiency | Power <24 W, efficacy ≥1.50 cd/W, off state ≤0.3 W, level 1 |
| Standby power | 0.5 W in sleep mode |
| VESA mounting | 100 mm x 100 mm mounting holes |
| USB downstream ports | 6 |
| Headphone/microphone jack | Combined headphone output/microphone input jack |
The maximum preset resolution is 1920 x 1080 at 60 Hz.
Connect the supplied USB cable between the monitor and the computer; after connecting it, the monitor's USB connectors can be used.
Confirm the MHL cable and MHL device are MHL certified, check that the device is on and not in standby, and verify the cable and selected input source correspond.
Set the system's default playback device to “DELL UZ2x15H,” then power-cycle or reset the monitor to factory settings.