The Alienware AW2720HF is a 27-inch curved gaming monitor with a resolution of 2560x1440 and a refresh rate of 240Hz. It also supports G-Sync technology, which can eliminate screen tearing and stuttering.
This document is the user guide for the Alienware AW2720HF monitor, a 27-inch (68.5 cm) gaming display from Dell. It describes the package contents, product features, identification of parts and controls, and the monitor's specifications, including supported video modes, electrical characteristics and pin assignments.
The guide explains how to set up the monitor (attaching the stand, connecting a computer, VESA wall mounting), how to operate it via the joystick and on-screen display (OSD) menu, how to use tilt, swivel and height adjustments, and how to install and use the AlienFX application through the Alienware Command Center (AWCC). It also covers the built-in diagnostics, self-test feature, common and product-specific troubleshooting, and regulatory information. This manual is written in Chinese.
| Screen type | Active matrix - TFT LCD |
|---|---|
| Panel technology | Fast IPS |
| Viewable area | 685 mm (27 inches) diagonal |
| Aspect ratio | 16:9 |
| Resolution | 1920 x 1080 at up to 240 Hz (DisplayPort and HDMI) |
| Brightness | 350 cd/m² (typical) |
| Contrast ratio | 1000 to 1 (typical) |
| Color gamut | 99% sRGB |
| Response time | 1 ms gray-to-gray in Extreme mode |
| Video inputs | 1 DisplayPort and 2 HDMI ports |
| USB ports | 1 USB upstream and 4 USB downstream ports |
| VESA mount | 100 mm x 100 mm mounting holes |
| Power consumption | 73 W (max); 0.2 W off/standby mode |
| AC input | 100 VAC to 240 VAC, 50 Hz or 60 Hz, 1.5 A |
No, the audio output port is for connecting speakers and does not support headphones.
The monitor's ComfortView feature is designed to reduce the amount of blue light emitted by the display to optimize eye comfort.
Run the monitor self-test, make sure the video cable between the monitor and computer is properly connected, and check the cable connector pins for bent or broken pins.
Reset the monitor to factory settings, run the self-test feature to see if the lines appear in self-test mode, check the video cable connector pins, and run the built-in diagnostics.
Do not perform any troubleshooting steps and contact Dell immediately.