The Dell PowerConnect W-AP130 Series Wireless Access Points support the IEEE 802.11n standard for high-performance WLANs.
The Dell PowerConnect W-AP130 Series wireless access points support IEEE 802.11a/b/g/n with MIMO technology and operate as either access points or air monitors. They require a Dell controller running ArubaOS 6.1.1 or later for centralized management and are powered via IEEE 802.3at PoE or an optional 12VDC adapter.
This guide details the installation process including pre-installation checks, mounting using the included ceiling rail adapters (1.4cm and 2.4cm), connecting Ethernet and console cables, installing external antennas on the W-AP134 model, and verifying connectivity before configuration. It also covers regulatory compliance for FCC and EU regions. This manual is written in Korean.
| Wireless Standards | IEEE 802.11a/b/g/n with MIMO |
|---|---|
| PoE Standard | IEEE 802.3at |
| Ethernet Ports | 2 × 10/100/1000Base-T RJ-45 auto-sensing MDI/MDX |
| Power Input | 56VDC via PoE or optional 12VDC AC-DC adapter |
| Antennas | W-AP134: external antenna connectors; W-AP135: internal antennas |
| LED Indicators | PWR, ENET 0, ENET 1, 11b/g/n (2.4GHz), 11a/n (5.0GHz) |
| Mounting | Ceiling rail adapters for 1.4cm and 2.4cm rails included; wall mount adapter sold separately |
| Reset Procedure | Power off, hold reset button, power on, wait for LED blinks |
| Management Software | ArubaOS 6.1.1 or later required |
| Regulatory Compliance | FCC and EU low-power radio LAN regulations |
| Maximum Cable Length | 100m (325 ft) CAT5 UTP |
The W-AP130 Series requires ArubaOS 6.1.1 or later.
Power off the AP, hold the reset button with a narrow object, power on the AP, wait for the power LED to blink within 5 seconds, release the button, then wait for the LED to blink again within 15 seconds indicating reset completion.
The access point supports IEEE 802.3at PoE and accepts 56VDC from a PSE.
The package includes two ceiling rail adapters for 1.4cm (9/16 inch) and 2.4cm (15/16 inch) ceiling rails.