The 3PK-NT023N Amplifier Probe Tone & Generator is a versatile tool that can be used to quickly and accurately trace and identify wires or cables. The probe can work with any existing tone generator on the market. It has 9 levels of adjustable volume for various work environments. The 9V battery provides up to 100 hours of use. It also has a headphone jack, a signal LED, and an LED light for working in dark areas.
The 3PK-NT023N is a Prokit's amplifier probe and tone generator set used to trace and identify wires or cables, including cables in a bundle. The probe can work with any existing tone generator, has adjustable volume, a signal LED, LED illumination, and NCV testing for AC 90-1000 V.
The manual covers features, specifications, and operating instructions for wire and cable testing, tip and ring identification, line condition and verification, continuity testing in CONT and TONE modes, NCV testing, and battery replacement. It is provided in English and Chinese. This manual is written in Chinese.
| Tone frequency | 1kHz |
|---|---|
| Max. testing distance | 1.5km |
| Max. working current (tone generator) | <=20mA |
| Tone mode | One / Two-note tone |
| Connector port | RJ11 (6 pin2c), Alligator clips |
| Compatible connectors | De-energized AC wire, telephone/twisted pair wire, voice and data category rated cable, and virtually any cable or wire |
| Function selection (tone generator) | TONE/OFF/CONT |
| Continuity test | 1 LED (<500 ohm) |
| Max. signal voltage | 8Vp-p |
| Power indicator (tone generator) | 1 LED |
| Phone line polarity indication | 1 LED |
| Phone line status indication | 1 LED |
| Live telecommunication equipment and router test | Yes |
| Voltage protection | DC 48V |
| Low battery display | 7V (LO BAT LED) |
| Battery (tone generator) | NEDA 1604/6F22 DC 9V x1 (not included) |
| Tone generator dimensions | 65 x 58 x 34 mm |
| Tone generator weight | 62g |
| Amplifier probe frequency | 1kHz |
| Max. working current (amplifier probe) | <=70mA |
| Function selection (amplifier probe) | 4-position mode switch (LED, NCV, OFF, SCAN) |
| Earphone jack | 1 |
| Signal status indication | 1 LED and buzzer |
| NCV indication | 1 LED (AC 90-1000V) |
| LED illumination | 1 LED |
| Power indication (amplifier probe) | 1 LED |
| Battery (amplifier probe) | NEDA 1604/6F22 DC 9V x1 (not included) |
| Amplifier probe dimensions | 230 x 56 x 25 mm |
| Amplifier probe weight | 80g |
| Adjustable volume level | 1-9 |
| Battery life | Up to 100 hours with a 9V battery |
| NCV testing | AC 90-1000V |
| Tone generator features | Red and black testing leads, RJ-11 jack, 3-position mode switch, 3 LED displays, single solid or dual alternating tone |
Each unit uses one NEDA 1604/6F22 DC 9V battery, which is not included.
The NCV function indicates AC voltage from 90 to 1000 V.
Yes, the probe can work with any existing tone generator in the market.
Remove the battery cover and change the switch position inside the tone generator.
Switch the tone generator to CONT, connect the leads to the wire pair under test, and watch the LED; it shows red for no continuity and dims for continuity below 500 ohm.