User's manual for the Prokit's SI-169U USB-powered 3D print finishing tool, covering specifications, features, cautions, accessories and warranty.
This is the two-page user's manual for the Prokit's SI-169U, a USB-powered 3D print finishing tool that the manual also describes as a USB powered soldering iron. It lists the tool's specifications, including DC 5V USB input, 8W power consumption, a tip temperature of 480°C ± 10%, a 25-second auto sleep mode and a 1.5M USB cable, together with the supplied accessories and the available replacement tips.
The manual explains the main features such as heating up in under 15 seconds, cooling down in under 25 seconds, the auto sleep design for saving power and extending heater life, the metal touch and vibration switch, and the working indicator LED. It then gives safety cautions for use at 480°C, notes that the auto sleep function does not work with a USB power adaptor, and closes with a Chinese warranty card covering a one-year main unit warranty and three-month heating element warranty. This manual is written in Chinese.
| Power Supply | USB input DC 5V |
|---|---|
| Power Consumption | 8W |
| Temperature | 480°C ± 10% |
| Auto Sleep Mode | 25 seconds |
| Indicator | LED light |
| USB cable length | 1.5 m |
| Dimensions | Ø19 x 163 mm |
| Heat-up time | Less than 15 seconds |
| Standard tip | SI-B162-T |
It uses a USB power supply with DC 5V input and draws 8W.
The tip temperature reaches 480°C ± 10%.
It heats up in less than 15 seconds and cools down in less than 25 seconds.
No. The manual states the auto sleep function will not work when connected with a USB power adaptor, so the power supply should be disconnected when not in use.