The Dell™ IN1930/IN2030M Monitor User's Guide provides information on setting up, operating, and troubleshooting your display.
Dell IN1930 and IN2030M are flat-panel LCD monitors with active matrix TFT displays. This user's guide covers package contents, parts and controls, specifications, plug-and-play capability, and maintenance guidelines.
Additional sections include power management modes, connector pin assignments, preset display modes, and physical characteristics for both models.
| IN1930 viewable area | 47.0 cm (18.5 inches) |
|---|---|
| IN1930 resolution | 1366 x 768 |
| IN2030M viewable area | 50.8 cm (20.0 inches) |
| IN2030M resolution | 1600 x 900 |
| Tilt adjustment | Supported |
| VESA mounting holes | 100 mm |
| Security lock slot | Included |
| ENERGY STAR | Compliant |
| EPEAT | Silver compliant |
| Plug and play | Supported if system supports it |
| IN1930 normal operation power consumption | 22 W maximum, 18 W typical |
| IN2030M normal operation power consumption | 25 W maximum, 20 W typical |
| Active-off mode power consumption | Less than 1 W |
| Switch off power consumption | Less than 0.5 W |
| AC input voltage | 100 to 240 VAC |
| Inrush current at 120 V | 30 A maximum |
| Inrush current at 240 V | 60 A maximum |
| Screen type | Active matrix TFT LCD |
| Panel type | TN |
| IN1930 pixel pitch | 0.300 mm |
| Viewing angle horizontal | 170 degrees typical |
| Viewing angle vertical | 160 degrees typical |
| Luminance output | 250 cd/m² typical |
| Contrast ratio | 1000 to 1 typical |
| Dynamic contrast ratio | 8,000,000 to 1 typical |
| Faceplate coating | Antiglare with hard-coating 3H |
| Backlight | LED light bar system |
| Response time | 5 ms typical (black to white) |
| Color depth | 16.7 million colors |
| Color gamut | 82% typical |
| Horizontal scan range | 30 to 83 kHz |
| Vertical scan range | 56 to 75 Hz |
| IN1930 maximum preset resolution | 1366 x 768 at 60 Hz |
| IN2030M maximum preset resolution | 1600 x 900 at 60 Hz |
| Video input signals | Analog RGB, 0.7 V +/- 5%, 75 ohm |
| Synchronization input signals | Separate horizontal and vertical synchronizations, polarity-free TTL level |
| IN1930 connector type | D-subminiature, blue connector |
| IN2030M connector type | D-subminiature, blue connector; DVI-D, white connector |
| IN1930 signal cable type | Analog detachable D-Sub, 15 pins, shipped attached |
| IN2030M signal cable type | D-sub detachable analog 15 pin, shipped attached |
| IN1930 height with stand | 349.10 mm (13.74 inches) |
| IN1930 width with stand | 445.41 mm (17.54 inches) |
| IN1930 depth with stand | 163.78 mm (6.45 inches) |
| IN2030M height with stand | 367.78 mm (14.48 inches) |
| IN2030M width with stand | 478.60 mm (18.84 inches) |
| IN2030M depth with stand | 163.78 mm (6.45 inches) |
The package includes the monitor, stand riser, stand base, power cable, VGA cable attached to the monitor, drivers and documentation media, quick setup guide, and product information guide.
1366 x 768 at 60 Hz.
1600 x 900 at 60 Hz.
22 W maximum and 18 W typical.
Yes, if supported by your system; it provides EDID through DDC protocols.