The Dell P2418HZm monitor is a 23.8-inch display with a 1920 x 1080 resolution and a 60 Hz refresh rate. It features a narrow bezel design and supports multiple inputs, including HDMI, DisplayPort, and VGA. The monitor also has built-in speakers and a USB 3.0 hub.
The Dell P2418HZm is a 23.8-inch active-matrix TFT LCD monitor with 1920 x 1080 resolution, an In-Plane Switching panel, LED backlight, and a built-in Full HD webcam, speakers, and microphone array. This guide covers package contents, parts identification, specifications, USB interface, setup, stand adjustment, OSD operation, Windows Hello and webcam setup, and troubleshooting.
It also documents power and electrical specifications, preset display modes, maintenance guidelines, wall mounting, cable organization, and resolution of USB, Skype for Business, and product-specific problems.
| Viewable area | 60.47 cm (23.8 inch) diagonal |
|---|---|
| Resolution | 1920 x 1080 |
| Built-in camera | 2MP Full HD image sensor and dual IR LEDs with infrared camera |
| Speakers | 2 x 5W integrated front-firing speakers |
| Connectivity | VGA, HDMI and DisplayPort |
| USB ports | 1 USB upstream port and 2x USB2.0/2x USB3.0 downstream ports (including 1x USB3.0 BC1.2 charging port) |
| Standby power | ≤0.3 W in Standby Mode |
| Eye comfort | Flicker-free screen and ComfortView feature |
| Screen type | Active matrix - TFT LCD |
| Panel type | In-Plane Switching Technology |
| Viewable image diagonal | 604.70 mm (23.80 in) |
| Horizontal active area | 527.04 mm (20.75 in) |
| Vertical active area | 296.46 mm (11.67 in) |
| Viewable area | 1562.46 cm2 (242.15 in2) |
| Pixel pitch | 0.2745 mm x 0.2745 mm |
| Pixel density | 93 PPI |
| Viewing angle | 178° vertical / 178° horizontal typical |
| Brightness | 250 cd/m² typical |
| Contrast ratio | 1000:1 typical; 8 Million:1 Dynamic |
| Aspect ratio | 16:9 |
| Display coating | Anti-glare with 3H hardness |
| Backlight | White LED edgelight system |
| Response time | 6 ms (gray to gray) |
| Color depth | 16.7 million colors |
| Color support | 83% (CIE 1976), 72% (CIE 1931) |
| Built-in devices | USB 3.0 super-speed hub (1x USB 3.0 upstream, 2x USB 3.0 downstream, 2x USB2.0 downstream, including 1x USB 3.0 BC1.2 charging port) |
| Horizontal scan range | 30 kHz to 83 kHz (automatic) |
| Vertical scan range | 56 Hz to 76 Hz (automatic) |
| Maximum preset resolution | 1920 x 1080 at 60 Hz |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Video input signals | Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance; HDMI 1.4; DisplayPort 1.2 |
| AC input | 100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.5A typical |
| Inrush current | 120 V: 30 A max at 0°C; 240 V: 60 A max at 0°C |
| Power consumption (Off Mode) | 0.2 W |
| Power consumption (Standby Mode) | 0.2 W |
| Power consumption (On Mode) | 14.6 W |
| Power consumption (Max) | 60.80 W |
| VESA mounting | 100 mm x 100 mm |
| Security-cable slot | Security-cable slot |
| Headphone/microphone jack | Headphone-out / Microphone-in combo jack |
The maximum preset resolution is 1920 x 1080 at 60 Hz.
It has 1 USB upstream port and 2x USB2.0/2x USB3.0 downstream ports, including 1x USB3.0 BC1.2 charging port.
Press and hold the button above the power button for 6 seconds.
Check the signal source, ensure the computer is not in standby or sleep mode, check the video cable, and reset the computer or video player.