The Dell UltraSharp U4919DW is a 49-inch curved monitor with a resolution of 3840 x 1080 and a refresh rate of 120Hz. It also features HDR10 support and 99% sRGB color gamut coverage.
Dell UltraSharp U4919DW is a 49-inch flat panel monitor with a 5120 x 1440 resolution, 32:9 aspect ratio, and In-Plane Switching panel. It supports HDMI, DisplayPort, and USB Type-C inputs, including USB Type-C power delivery up to 90 W.
This guide covers package contents, parts identification, specifications, stand attachment, cable connections, OSD menu operation, KVM and Auto KVM settings, tilt, swivel, vertical adjustment, and troubleshooting for USB and display issues.
| Screen type | Active matrix - TFT LCD |
|---|---|
| Panel technology | In-Plane Switching |
| Viewable diagonal | 1244.6 mm (49 inches) |
| Horizontal active area | 1198.08 mm (47.17 inches) |
| Vertical active area | 336.96 mm (13.27 inches) |
| Active area | 403705 mm2 (625.74 inch2) |
| Pixel pitch | 0.234 mm x 0.234 mm |
| Pixel per inch | 109 |
| Viewing angle | 178° vertical and 178° horizontal (typical) |
| Luminance output | 350 cd/m² (typical) |
| Horizontal scan range | 25 kHz to 115 kHz |
| Vertical scan range | 24 Hz to 86 Hz |
| Maximum preset resolution | 5120 x 1440 at 60 Hz |
| Supported HDMI video modes | 480p, 576p, 720p, 1080i, 1080p |
| Video input signals | HDMI 2.0/DP 1.4 |
| AC input | 100 VAC to 240 VAC, 50 Hz or 60 Hz, 3 A (typical) |
| Inrush current at 120 V | 40 A (max.) at 25 °C |
| Inrush current at 240 V | 80 A (max.) at 25 °C |
| Power consumption (off mode) | 0.2 W |
| Power consumption (standby mode) | 0.4 W |
| Power consumption (on mode) | 47 W |
| Maximum power consumption | 230 W |
| Pon | 38.8 W |
| TEC | 123.2 kWh |
| USB Type-C power delivery | Up to 90 W |
| USB Type-C port | USB 2.0 with 90 W output |
| VESA mounting holes | 100 mm |
| Color gamut | 99% sRGB with average Delta E < 2 |
| HDMI/DP color support | 10-bit color at 60 Hz |
| USB Type-C color support | 8-bit color at 60 Hz |
The maximum preset resolution is 5120 x 1440 at 60 Hz.
The USB Type-C port can supply up to 90 W.
Check that the monitor is turned on, verify USB Selection, reconnect the upstream and downstream cables, and reboot the computer.
Remove all input cables, press Buttons 3 and 4 for 5 seconds, then choose Enable.