This document describes the installation and operating instructions for a swimming pool heat pump unit.
This document serves as the installation and instruction manual for the Hayward HP50A and HP50HA swimming pool heat pump units. It covers essential topics including system specifications, location requirements, plumbing and electrical connections, and initial start-up procedures. The unit utilizes R410A refrigerant and features a rotary compressor with a titanium heat exchanger designed to withstand chlorinated water environments.
| Refrigerant | R410A |
|---|---|
| Heating Capacity | 14.7 kW / 50,000 BTU/h |
| Heating Power Input | 2.68 kW |
| Running Current | 12 A |
| Power Supply | 208-230V~/60Hz |
| Compressor Type | Rotary |
| Fan Power Input | 120 W |
| Fan Rotate Speed | 850 RPM |
| Noise Level | 54 dB(A) |
| Water Connection Size | 1.5 inch |
| Water Flow Volume | 4.5 m3/h / 20 gpm |
| Water Pressure Drop (max) | 10 kPa / 1.5 psi |
| Net Dimensions | 1053x420x650 mm |
| Net Weight | 58 kg |
The unit uses R410A refrigerant.
The maximum water pressure drop is 10 kPa or 1.5 psi.
Normally, the pool heat pump is installed within 24.6ft (7.5 metres) of the pool.
You should adjust the bypass valve to obtain a difference of 2ºC between the water inflow and outflow temperatures.