Victoria Plus Pool Pumps Installation and General Maintenance Manual

This manual contains basic information on the safety measures to be adopted during installation and star


Victoria Plus Pool Pumps Installation and General Maintenance Manual - cover page
Category
Other products
Document type
Service Manual
Language
English
Pages
50
File format
PDF
File size
1.3 MB
Published
16 November, 2023
Updated
16 November, 2023
MD5 checksum
63AAC53D68C97F5B04B76EF690DCA1BF

About this manual

This manual covers installation, start-up and general maintenance for Victoria Plus pool pumps. It includes safety regulations, piping and electrical installation guidance, priming and start-up steps, and routine maintenance checks.

The document is provided in multiple languages and focuses on safe assembly, correct electrical connection, and regular inspection of the pump and pre-filter.

What's inside

  • General Safety Instructions
  • General Safety Regulations
  • Installation and Assembly
  • Piping
  • Location
  • Electrical Installation
  • Start-Up Instructions
  • Maintenance

Specifications

Maximum water temperature35 C
RCD rated residual operating currentnot exceeding 30 mA
Self-priming suction pressure differential above water levelnot higher than 0.02 MPa (2 mH2O)
Routine pump check intervalevery 100 hours of operation

Frequently asked questions

What water temperature can the pump handle?

The pump is designed for clean water at temperatures not exceeding 35 C.

What RCD rating is required for the electrical supply?

The supply must be protected by an RCD with a rated residual operating current not exceeding 30 mA.

How often should the pump be checked?

The pump should be checked every 100 hours of operation or less, depending on water cleanliness.

Can the pump be installed above the water level?

A self-priming pump may be fitted above the water level if the suction pressure differential is not higher than 0.02 MPa (2 mH2O).

Download PDF (1.3 MB)

Also Manuals