This document describes how to change the manual transmission oil in an Audi A4 sedan.
This AUTODOC guide explains how to replace the manual gearbox oil on the Audi A4 Berlina (8K2, B8). It states the procedure can also be used for the 3.0 TDI quattro, 2.7 TDI and S4 quattro versions, and notes that the steps may vary slightly depending on the vehicle design.
The document lists the required tools (wire brush, multi-purpose cleaning spray, H17 hex bit, No. 12 socket, Phillips screwdriver, torque wrench, funnel, oil drain pan and fender protector) and gives a recommended 20-step sequence: lifting the car, removing the lower acoustic insulation, draining the old oil, refilling through the fill hole and refitting everything, including tightening torques and the required oil quantity. This manual is written in Spanish.
| Transmission oil quantity | 1.5 l |
|---|---|
| Drain and fill plug tightening torque | 32 Nm |
| Waste oil container capacity | at least 2 l |
It can be used for the 3.0 TDI quattro, the 2.7 TDI and the S4 quattro, and the steps may vary slightly depending on the vehicle design.
A wire brush, multi-purpose cleaning spray, H17 hex bit, No. 12 socket, Phillips screwdriver, torque wrench, funnel, oil drain pan and fender protector.
1.5 liters, poured in through the fill hole with a funnel.
Both plugs are tightened with a torque wrench to 32 Nm using the H17 hex bit.