Moen INS2300 Inductive Floor Mounted Urinal requires a drain and water pipe, please make sure that the connection is sealed properly.
The Moen INS2300 is an inductive floor-mounted urinal. This installation guide covers pre-installation checks, tools that may be needed, and steps for preparing the drain outlet, drilling for expansion bolts, fitting the sealing ring, locking the urinal to the wall, connecting the water inlet hose and sealing the wall joint with neutral anti-mold silicone.
The document also gives user care and maintenance instructions: do not use cement for installation, use the product above 0°C, avoid flushing paper or cigarette ends, do not scrub with steel wool, keep flush holes clean in hard water, and avoid corrosive cleaners or solvents. This manual is written in Chinese.
| Drain pipe diameter | ø110 mm |
|---|---|
| Drain pipe height above floor | 10–13 mm |
| Operating environment | Above 0 °C |
The drain pipe should be ø110 mm in diameter and extend 10–13 mm above the floor.
Confirm that no pipes or wires are embedded in the wall where you plan to drill.
No. The guide prohibits cement because its thermal expansion may crack or damage the ceramic product.
At least once a week, using a toilet cleaner and a long-handled brush to clean the flush holes.