This is the installation instruction manual of FRHN series one-way clutches. It introduces the working principle, design structure, installation and maintenance of one-way clutches.
The RINGSPANN FRHN Series is an integral low-speed one-way clutch used as a backstop to prevent reverse rotation of machinery. The manual explains its main components, delivery condition, safe-operation requirements and installation procedure, including shaft fit, rotation direction, axial positioning, oil gauge and torque arm installation.
It also covers maintenance and lubrication, including oil-level checks, oil changing intervals, breathing valve cleaning and warnings against mixing lubricants or switching between oil and grease lubrication. This manual is written in Chinese.
| Inner ring bore tolerance | ISO H7 |
|---|---|
| Mating shaft tolerance | ISO h6 or j6 |
| Torque arm top clearance | Approximately 10 mm |
| Torque arm side clearance | Approximately 40 mm per side |
| Minimum installation angle from vertical | 5° |
| Oil cleaning interval | Every 3 to 6 months |
It can be used as a backstop to prevent equipment from rotating in reverse.
A flat key must be used; wedge keys must not be used.
The oil level should be observed once a week during the first month of use.
No. When changing from one lubricant brand to another, drain the oil completely and flush with mineral spirits.