RINGSPANN FB/FBF Integrated One-Way Clutch Installation Manual

This manual provides installation instructions, safety warnings, and operational checks for RINGSPANN integrated one-way clutches models FB and FBF.


RINGSPANN FB/FBF Integrated One-Way Clutch Installation Manual - cover page
Brand
RINGSPANN
Document type
Installation Guide
Language
Chinese
Pages
11
File format
PDF
File size
1.2 MB
Published
27 October, 2026
Updated
27 October, 2026
MD5 checksum
173CFA07C9419BDEE9819248F3D9AE62

About this manual

This document is the installation operation manual for RINGSPANN integrated one-way clutches, specifically models FB and FBF. It covers product introduction, application scenarios (as non-return devices, overrunning clutches, or positioning clutches), design details, and various type variants including standard, coated, ground, and centrifugal types.

The guide provides critical safety warnings regarding installation by trained personnel, torque limits, and the prohibition of torsional vibrations. It details technical requirements for shaft tolerances (ISO H7/h6/j6) and bolt specifications (Grade 8.8 recommended), along with step-by-step installation procedures ensuring correct rotation direction alignment. This manual is written in Chinese.

What's inside

  • Safety Instructions
  • Clutch Applications
  • Design Components
  • Type Variants
  • Technical Requirements
  • Delivery Status
  • Installation Steps
  • Pre-Commissioning Check

Frequently asked questions

What are the main components of the FB and FBF clutches?

The main components include the inner ring, wedges, outer ring, bearings, seals, end caps, bolts, and lubricating oil.

What bolt grade is recommended for installation?

Bolt performance class 8.8 is sufficient; Grade 12.9 bolts should not be used due to low elongation at break.

What shaft tolerance is required for the inner ring hole?

The hole tolerance of the inner ring must be ISO H7.

Download PDF (1.2 MB)