This user manual is applicable to Control Panel and includes instructions for using and managing the product.
This guide explains how to install and configure the Hikvision Shock Detector for ATM protection. It includes steps for wiring, mounting, and adjusting sensitivity. The detector responds to shock, explosion, mechanical vibration, and temperature changes, with adjustable sensitivity and dual-color LED status indicators. Alarm triggers include voltage drops below 8V and environmental interference detection.
The device uses a ceramic sensor to avoid environmental interference and can distinguish between different shock intensities. Installation requires disassembling the ATM’s front cover, wiring, securing with screws, and powering on to adjust sensitivity. Testing involves simulated impacts and vibrations to verify functionality.
| Detection Types | Shock, explosion, mechanical vibration, temperature change |
|---|---|
| Temperature Alarm Threshold | 10°C increase within 30s |
| Low Voltage Alarm Threshold | Less than 8V |
| Detection Sensitivity Adjustment | Adjustable via sensitivity nut |
| Operating Distance (Metal) | 2m (lowest sensitivity), 7m (highest sensitivity) |
Disassemble the front cover with a straight screwdriver, wire the detector to the control panel, secure it with 3 screws, power it on, and adjust sensitivity.
It detects shock, explosion, mechanical vibration (e.g., from drills), and temperature changes.
An alarm will be triggered if the voltage is less than 8V.