This document is a service manual for MOYNO® 500 PUMPS 200 SERIES 20302, 20402, 20501, 20502, 22001, 22002, 23201, AND 23203 MODELS products, mainly introducing the appearance, design features, installation methods, etc.
This service manual covers Moyno 500 Pumps 200 Series models 20302, 20402, 20501, 20502, 22001, 22002, 23201, and 23203. It includes design features, installation, operation, troubleshooting, disassembly, assembly, parts list, and repair/conversion kit information.
The pumps use stainless steel or aluminum housings, phenolic or stainless steel rotors, NBR stators, stainless steel shafts, prelubricated sealed ball bearings, and mechanical seals. Stated operating limits include 1750 rpm maximum speed, 40 psig maximum discharge pressure, and elastomer temperature limits.
| Housing | Stainless steel or aluminum |
|---|---|
| Pump rotor | Phenolic and AISI 316 stainless steel |
| Pump stator | NBR (Nitrile) |
| Shaft | AISI 316 stainless steel |
| Bearings | Prelubricated, fully sealed ball bearings |
| Seal | Mechanical (carbon/ceramic) |
| Maximum speed | 1750 rpm |
| Maximum discharge pressure | 40 psig |
| Self-priming suction lift | 25 feet at 1750 rpm |
| Minimum lubricating flow rate | At least 10% of rated capacity |
| Piping (203, 204, 205, 220 models) | 3/8 inch NPT |
| Piping (232 models) | 1/2 inch NPT |
| Temperature limit (NBR) | 10 to 160 F |
| Temperature limit (EPDM) | 10 to 210 F |
| Temperature limit (FPM) | 10 to 240 F |
| Fluid viscosity limit | 20,000 CP or 100,000 SSU |
| Pump rotation | Clockwise when facing shaft |
| Coupling spacing | At least 1/16 inch apart |
The maximum discharge pressure is 40 psig.
The maximum speed is 1750 rpm.
Pump rotation must be clockwise when facing the shaft.
NBR is 10 to 160 F, EPDM is 10 to 210 F, and FPM is 10 to 240 F.