Fosroc Nitoflor FC150 Solventless Epoxy Floor Coating Installation Guide

Nitoflor FC150 is a solventless epoxy floor coating that is resistant to abrasion, chemical corrosion, and moisture. It is ideal for use in wet areas that require strong resistance to chemicals and oils.


Fosroc Nitoflor FC150 Solventless Epoxy Floor Coating Installation Guide - cover page
Brand
Fosroc
Category
Chemical products
Document type
Installation Guide
Language
Chinese
Pages
5
File format
PDF
File size
515 KB
Published
30 October, 2023
Updated
30 October, 2023
MD5 checksum
1A40158D5EDB107430AEA3E7EDEAF356

About this manual

Fosroc Nitoflor FC150 is a thick-coat, solventless, moisture-tolerant epoxy floor coating supplied as pre-weighed base and hardener components. The document describes its use as an abrasion-, chemical- and moisture-resistant floor finish for wet areas such as dairy plants, soft-drink production sites, chemical plants, parking areas and workshops.

It covers product advantages, design requirements, surface preparation for new and old concrete and steel, primer selection, mixing, standard and anti-slip application, application limits, coverage and supply, health and safety, and storage. Stated properties include a mixed density of about 1.5 g/cm³, tensile bond strength of at least 2.0 MPa, compressive strength of at least 60 MPa after 7 days, and a shelf life of 12 months in unopened packaging stored below 35°C. This manual is written in Chinese.

What's inside

  • Product properties
  • Product uses
  • Product advantages
  • Design specification
  • Surface preparation
  • Mixing
  • Standard application
  • Anti-slip application
  • Application limitations
  • Coverage and supply

Specifications

Mixed densityApprox. 1.5 g/cm³
Dry time, touch dry≤6 hours
Dry time, hard dry≤48 hours
Tensile bond strength, standard conditions≥2.0 MPa
Abrasion resistance (750 g/500 r)≤0.030 g
Impact resistanceGrade II (1000 g steel ball, 100 cm)
Compressive strength, 7 days≥60 MPa
Anti-slip, dry friction coefficient≥0.50
Water resistance, 168 hNo bubbles, peeling or discoloration
Application time40 minutes at 20°C; 20 minutes at 35°C
Curing time24 hours at 20°C; 18 hours at 35°C
Maximum interval between coats36 hours at 20°C; 15 hours at 35°C
Shelf life12 months

Frequently asked questions

What is Nitoflor FC150 used for?

Nitoflor FC150 is used as a floor coating in wet areas that require resistance to chemicals and oils, such as dairy plants, soft-drink production sites, chemical plants, parking areas and workshops.

How is Nitoflor FC150 mixed and applied?

The hardener is added to the base and mixed for 3 to 5 minutes; the first coat is applied at a minimum wet-film thickness of 200 µm.

What are the application temperature and humidity limits?

Do not apply Nitoflor FC150 when the air temperature is below 5°C or falling at 5°C, or when relative humidity is above 90%.

What is the shelf life and storage condition?

The shelf life is 12 months when the unopened original packaging is stored in a warehouse below 35°C.

Download PDF (515 KB)

More Fosroc Manuals


View all Fosroc manuals →