This manual provides instructions on how to use the AC10 router, including wiring, setting, connection, and management.
This is the User Guide for the Mercusys AC10 AC1200 Wireless Dual Band Router. It starts with an introduction to the product and its appearance (front and rear panels), then explains how to position the router and connect it to the internet in Router Mode or Access Point Mode, and how to log in to the router.
The main part of the guide describes the web management pages in Router Mode: network settings (status, internet, MAC clone, LAN, IPTV/VLAN, DHCP server, dynamic DNS, static routing), wireless settings including guest network, wireless schedule and WPS, NAT forwarding, parental controls, QoS, security, IPv6 and system tools such as firmware upgrade, backup and restore, password and management options, system log, diagnostics, time, reboot and LED control. Access Point Mode settings are covered separately, and the guide ends with an FAQ appendix and instructions for configuring the PC.
| Wireless technology | 802.11ac |
|---|---|
| 2.4 GHz band speed | 300 Mbps |
| 5 GHz band speed | 867 Mbps |
| Operating frequency and maximum transmitted power (2.4 GHz) | 2400 MHz - 2483.5 MHz (20 dBm) |
| Operating frequency and maximum transmitted power (5 GHz) | 5150 MHz - 5250 MHz (23 dBm) |
| RF exposure distance | 20 cm from your body |
Reboot your main router and try again, make sure you are accessing the web management through a wireless connection, and verify that http://mwlogin.net is correctly entered in the web browser.
With the router powered on, press and hold the Reset button on the router until there is an obvious change of the LEDs, then release the button. Note that the current configuration settings will be lost.
By default, the wireless network has no password.
Reset the router as described in FAQ Q3, and then create a password for future logins.