This product is designed to meet the requirements of GB17945-2010 Emergency Lighting and Evacuation Indication System. Its features are: 1. No mechanical electric shock during emergency conversion, safe and reliable performance. 2. Intelligent constant current output chip inside makes the lamp brightness more stable. 3. Using LED as light source, low power consumption, long life, strong smoke penetration, easy to manage.
This is the Chinese installation and use instruction manual for the Gateway JT-ZLJC-E12W-T8-12H, a centrally powered, centrally controlled fire emergency lighting luminaire in the T8-12H series. The manual states that the luminaire is designed to meet GB17945-2010 and describes its LED light source, intelligent constant-current output and its use in crowded places such as high-rise buildings, shopping malls, entertainment venues, banks and hospitals.
The document gives the model code breakdown, main technical parameters, structure and working principle, wall mounting and wiring, addressing the luminaire in the controller's host software, a troubleshooting table, maintenance, transport and storage, unpacking checks and safety precautions. It is 7 pages long and was issued by Shenzhen Gateway Technology Co., Ltd. This manual is written in Chinese.
| Rated supply voltage | DC36V |
|---|---|
| Main power consumption | 12W |
| Enclosure protection rating | IP30 |
| Emergency operating time | 90 minutes |
| Light source | LED, DC3.0V |
| Standard | GB17945-2010 |
| Emergency output luminous flux | ≥50 lm |
| Emergency transfer time | ≤5 s |
The emergency operating time is 90 minutes, and the emergency output luminous flux is at least 50 lm.
It is powered by a two-wire DC36V supply, and the polarity of the power/signal line must be observed to keep communication working.
Check with a multimeter whether the upstream circuit has voltage output, replace the luminaire, or send an "open terminal" command from the host management software.
The LED or the emergency luminaire should be replaced.