Waterco Hydrostorm ECO-V is a variable speed pump produced by Waterco company, which can reduce energy consumption and operating noise.
The Waterco Hydrostorm ECO-V Operating Guide covers the Hydrostorm ECO-V variable speed pool pump and its three factory speed settings: ECO (Low), Medium and High. It explains the control panel indicators, speed adjustment in 25 RPM increments, and how to save a changed speed setting.
The guide also describes pump start-up, minimum operating hours, flow and head-loss charts, slow-flow benefits, low-speed noise, off-peak operation, and the 10-second restart delay.
| Speed range | 1000 to 2850 RPM |
|---|---|
| ECO (Low) factory speed | 1475 RPM |
| Medium factory speed | 2400 RPM |
| High factory speed | 2850 RPM |
| Speed adjustment increment | 25 RPM |
| Minimum operating RPM | 1000 RPM |
| Noise at low speed | 55.5 dBA |
| High-speed start-up duration | 3 minutes |
| Minimum restart delay | 10 seconds |
Press and hold the required speed setting button for 3 seconds until its indicator light flashes, then use the up or down arrow buttons to change the RPM in 25 RPM steps. Hold MED/OK for 5 seconds to save the adjustment.
The pump starts on the High speed setting for 3 minutes, then switches to the pre-selected speed setting.
The guide states that the low speed setting reduces noise to 55.5 decibels (dBA).
Contact your pool equipment supplier or store for maintenance advice.