The Hong Run NHR-PR10 Simple PLC manual provides installation, wiring, programming and safety instructions for the integrated controller.
The NHR-PR10 series Simple PLC is a Chinese‑language integrated controller that combines logic judgment, output, delay, timing, counting, jump and loop functions. It is suited for public‑area lighting, green‑belt irrigation, livestock feeding, and general equipment control.
The manual covers product introduction, technical parameters, safety and installation guidelines, wiring diagrams, programming modes, key operation keys, display interface flow, program structure, and example applications. It also details communication via RS‑485 MODBUS RTU and provides troubleshooting and maintenance advice. This manual is written in Chinese.
| Power supply (AC) | 100‑240 V, 50/60 Hz |
|---|---|
| Power supply (DC) | 12‑24 V |
| Digital inputs | 8 channels (NPN/PNP/dry contact) |
| Digital outputs | 8 channels (2 SPDT, 6 NO) |
| Backlight auto‑off time | 1‑99 min or always on |
| Display | 2.8‑inch dot‑matrix LCD with LED backlight |
| Insulation resistance | ≥20 MΩ @ 500 VDC |
| Dielectric strength | 2300 VAC, 50/60 Hz |
| Relative humidity | 10 %–90 % RH (no condensation) |
| Protection rating | IP20 (panel mounted) |
The device includes an RS‑485 port that supports MODBUS RTU communication.
It can be powered from either 100‑240 VAC or 12‑24 VDC.
The backlight can be set to turn off after 1 to 99 minutes, or it can be set to stay on continuously.