This manual provides detailed instructions for the installation of Watts Hydrants exterior wall, interior wall, hot & cold, outdoor flush in-ground & outdoor post.
These installation instructions cover Watts HY-330, HY-420, HY-500, HY-600, and HY-725 hydrants for exterior wall, interior wall, hot and cold, outdoor flush in-ground, and outdoor post applications. The document states that local building or plumbing codes may require modifications and that the product must be installed by a licensed contractor.
The guide describes typical installation details, hydrant selection factors, flow rate, non-freeze operation, and the operating pressure and temperature range. It also includes maintenance and periodic inspection information and a limited one-year warranty from Watts Regulator CO.
| Hose connection | 3/4 in. |
|---|---|
| Piping connection | 3/4 in. male, 1 in. female, dual threaded |
| Standard flow rate | Approximately 10 GPM |
| Operating pressure range | 8 PSI |
| Operating temperature range | 33°F to 130°F |
| Head, wall casing and seat casting material | Bronze |
| Vacuum breaker | Built-in on non-freeze and moderate climate wall hydrants |
Standard 3/4-inch hydrants discharge approximately 10 GPM under normal operating conditions.
They are designed to operate within a pressure range of 8 PSI.
Yes. Non-freeze hydrants drain automatically when the water is turned off, which helps prevent freezing.
They should be tested periodically according to local codes, at least once per year or more as service conditions warrant.