Installation, maintenance and repair guide for Watts RP/IS-009 009NRS reduced pressure zone backflow preventers.
The manual provides step‑by‑step installation instructions for the Series 009 and LF009 reduced pressure zone assemblies, covering indoor and outdoor mounting, air‑gap requirements, and shut‑off valve placement. It also details testing procedures, periodic inspection schedules, and safety warnings required by local plumbing codes and NFPA standards.
Servicing sections describe how to disassemble and clean the relief valve, replace diaphragms, seats, springs and O‑rings, and troubleshoot common problems such as check‑valve failure or chatter. A troubleshooting guide and warranty information are included at the end of the document.
| Size range | 1/4" – 3" (8 – 80 mm) |
|---|---|
| Relief valve discharge flow (½" – 1") | 45 GPM |
| Relief valve discharge flow (2" – 3") | 112 GPM |
The product must be tested periodically, at least once per year or more often if service conditions warrant.
If the disc is damaged, the disc assembly should be replaced with a new part from the repair kit.