This document is a sewing machine manual, which introduces the composition of the sewing machine, specifications, stitch table, installation, preparation for sewing, use of the operating panel, etc.
This manual provides detailed instructions for installing, operating, and maintaining JUKI sewing machines including models LZ-2290A-SR, IP-110D, and SC-916. It covers component identification, stitch pattern settings, thread tension adjustment, and troubleshooting. The guide also includes maintenance procedures such as lubrication, cleaning, and part replacement.
The manual is structured to assist users from initial setup through advanced pattern programming, including custom stitch creation and reverse feed stitching. It includes technical specifications for machine performance and electrical requirements, as well as error codes and corrective measures.
| Max. sewing speed | 4,000 sti/min (standard delivery) |
|---|---|
| Max. zigzag width | 8 mm (standard delivery) |
| Stitch patterns | 14 kinds, 180 patterns |
| Needle | SCHMETZ 438 #75 |
| Oil used | JUKI New Defrix Oil No. 1 |
| Supply voltage | Single phase 100V / 110V / 120V or 3-phase 200V / 220V / 240V |
| Operating environment | Temperature: 0 to 40°C, Humidity: 90% or less |
The maximum sewing speed is set to 4,000 stitches per minute at the time of delivery.
The maximum zigzag width is limited to 8 mm at the time of standard delivery.
The machine comes with a SCHMETZ 438 #75 needle.
JUKI New Defrix Oil No. 1 is recommended for lubrication.