This manual describes the installation, operation and maintenance of the FastCool 10 cooling unit
The Kemppi FastCool 10 is a microprocessor-controlled cooling unit designed specifically for FastMig welding equipment to cool welding guns. It features a 3-liter reservoir and operates automatically when welding begins, continuing to run for 1 to 5 minutes after welding stops to cool the liquid. The unit connects to the power supply via mains voltage and control connectors and uses a mixture of 20% to 40% ethanol and water as the cooling liquid.
| Operating voltage | 400V -15%...+20% |
|---|---|
| Connection capacity | 100 % ED |
| Cooling power | 1 kW |
| Start pressure, max. | 0.4 MPa |
| Cooling liquid | 20% – 40 % etanol/water |
| Tank volume | ca. 3 l |
| External dimensions | 570 x 230 x 280 mm |
| Weight | 11 kg |
| Operating temperature range | -20 … +40 °C |
| Storage temperature range | -40 … +60 °C |
| EMC class | A |
| Degree of protection | IP23S |
The reservoir should be filled with a 20% to 40% mixture of ethanol and water, or any other suitable antifreeze agent.
After welding stops, the pump continues to operate for approximately 1 to 5 minutes to cool the liquid down to the surrounding temperature.
The maximum start pressure for the FastCool 10 is 0.4 MPa.
The overheat signal lamp lights up when the machine's temperature control detects that the cooling water is overheating.