This manual provides maintenance and service instructions for the Fleck 2510 water softener. It covers installation, operation, and troubleshooting information.
This document is the service manual for the Pentair FLECK 2510 water softener. It provides technical instructions for installation, startup procedures, and the configuration of various timer models (3200, 3210, 3220, 3230). The guide details the setup for regeneration cycles and includes specific sections for different valve assemblies, such as the SXT 2510 and manual valve 2510. This manual is written in Spanish.
| Minimum Water Pressure | 20 psi (1.4 bars) |
|---|---|
| Maximum Water Pressure | 125 psi (8.6 bars) |
| Maximum Water Temperature | 110 °F (43 °C) |
| Minimum Drain Line Size (Residential) | 1/2" (13 mm) |
A minimum water pressure of 20 psi (1.4 bars) is required for the regeneration valve to function effectively.
The water temperature must not exceed 110 °F (43 °C).
Only silicone-based lubricants should be used for the distributor seal and tank.