This file is the instruction manual for a testing instrument, which mainly introduces the use method, precautions and other information of the product.
This manual provides instructions for using the P2A software to parameterize, adjust, and analyze the Testo 6383 differential pressure transmitter. It includes safety guidelines, installation steps, operation procedures, and troubleshooting. The software enables users to configure instrument settings, test outputs, and manage calibration data. Maintenance and cleaning procedures are also detailed to ensure proper instrument function and longevity. This manual is written in German.
| Accuracy | ±0.3 % of measuring range, additional ±0.3 Pa intrinsic error |
|---|---|
| Measuring range | 0 to 50 Pa, 0 to 100 Pa, 0 to 500 Pa, 0 to 10 hPa, -10 to 10 Pa, -50 to 50 Pa, -100 to 100 Pa, -500 to 500 Pa, -10 to 10 hPa |
| Measuring cycle | 1/sec |
| Interface | Mini-DIN for P2A software (adjustment and parameterization software) • optional: Ethernet interface |
| Voltage supply | 4-wire (separate signal and supply lines): 20 to 30 V AC/DC, 300 mA power consumption |
| Analog output | 0 to 1 V ± 1.5 mV (4-wire) or 0 to 5 V ± 7.5 mV (4-wire) or 0 to 10 V ± 15 mV (4-wire) or 0 to 20 mA ± 0.03 mA (4-wire) or 4 to 20 mA ± 0.03 mA (4-wire) |
| Resolution of analog output | 12 bit |
Never use the instrument and connected probes to measure on or near live parts. Only authorized personnel should wire and connect the transmitter, and always comply with local electrical safety regulations.
The measuring range varies depending on resolution: 0 to 50 Pa, 0 to 100 Pa, 0 to 500 Pa, 0 to 10 hPa, -10 to 10 Pa, -50 to 50 Pa, -100 to 100 Pa, -500 to 500 Pa, -10 to 10 hPa.
The accuracy is ±0.3 % of measuring range, with an additional ±0.3 Pa intrinsic error.
It supports a Mini-DIN interface for P2A software and an optional Ethernet interface.