Allied Telesis xC613-22037-00 Layer 2 Ethernet Switch Feature Overview and Configuration Guide

1. This document introduces the feature overview and configuration methods of Ethernet switches. 2. Ethernet switches are used to connect multiple Local Area Network (LAN) segments together to form an extended LAN. 3. Stations connected to different LANs can be configured to communicate with each other as if they were on the same LAN. 4. They can also divide one physical LAN into multipleVirtual LANs (VLANs). 5. Stations connected to each other on the same extended LAN can be grouped in separateVLANs, so that a station in oneVLAN can communicate at Layer 2 with other stations in the sameVLAN, but must go through higher layer routing protocols to communicate with stations in otherVLANs. 6. Ethernet switches appear transparent to higher layer protocols, transferring frames between the data link layers of the networks to which they are attached. 7. A Layer 2 switch accesses each physical link according to the rules for that particular network. 8. Access may not always be instant if a link's bandwidth is oversubscribed, so the switch must be capable of storing and forwarding frames. 9. Storing and forwarding enables the switch to examine both theVLAN tag fields and Ethernet MAC address fields in order to forward the frames to their appropriate destination. 10. In this way, the switch can act as an intelligent filtering device, redirecting or blocking the movement of frames between networks. 11. Because switch ports can sometimes receive broadcasts, multicasts, and group multicast frames from networks and VLANs, the Ethernet switch must forward these frames to all other ports connected to the switch.


Allied Telesis xC613-22037-00 Layer 2 Ethernet Switch Feature Overview and Configuration Guide - cover page
Brand
Allied Telesis
Category
Network Switches
Document type
User Manual
Language
English
Pages
22
File format
PDF
File size
479 KB
Published
17 October, 2023
Updated
17 October, 2023
MD5 checksum
8C9DF56E19745A5D32D8518B29C441CE

About this manual

This document serves as a technical guide for Layer 1 and Layer 2 Ethernet switching. It explains how Layer 2 switches connect LAN segments, manage Virtual LANs (VLANs), and forward frames based on MAC addresses and VLAN tags. The guide details the switch's role as an intelligent filtering device and its use of Quality of Service (QoS) queues to prioritize traffic.

What's inside

  • Introduction
  • Layer 1-The Physical Layer
  • Switch Ports
  • Activating and deactivating switch ports
  • Autonegotiation
  • Duplex mode
  • Speed options
  • Layer 2-the Switching Process
  • The ingress rules
  • The learning process

Specifications

Software Version5.4.4 or later

Frequently asked questions

What software version does this guide apply to?

This guide applies to all AlliedWare Plus products running version 5.4.4 or later.

What is the purpose of a Layer 2 switch according to this guide?

It connects multiple LAN segments to form an extended LAN and can divide one physical LAN into multiple VLANs.

How are switch ports identified in this device?

By a 3-digit format x.y.z, where x is the device number, y is a module number, and z is the port number within the module or on the base device chassis.

What command is used to deactivate a switch port?

The shutdown command.

Download PDF (479 KB)

More Allied Telesis Manuals


View all Allied Telesis manuals →