This document introduces the tuning method of FOX rear shock DHX2, including the correct shock compression setting, the measurement and adjustment method of compression, and the recommended shock setting.
This document provides instructions for setting the sag on the FOX DHX2 rear shock. Users are guided to measure the eye-to-eye distance with and without rider weight to determine the correct sag, which should be approximately 30% of total shock travel. If the desired sag cannot be achieved by adjusting the preload, the guide recommends changing the spring rate.
| Recommended sag | 30% of total shock travel |
|---|
The recommended sag setting is 30% of the total shock travel.
The sag setting should be set to 30% of total shock travel.
To decrease sag, turn the preload adjuster clockwise no more than two full turns.