FOX 36 FLOAT Suspension Fork Tuning Guide

This guide provides instructions for tuning the FOX 36 FLOAT suspension fork, including sag settings, rebound, compression adjustments, and front wheel…


FOX 36 FLOAT Suspension Fork Tuning Guide - cover page
Brand
Fox
Category
Other
Document type
User Manual
Language
English
Pages
12
File format
PDF
File size
632 KB
Published
23 October, 2026
Updated
23 October, 2026
MD5 checksum
E8B6379C1B19C9F65AE153E5C34D6B54

About this manual

This tuning guide covers the setup of the FOX 36 FLOAT suspension fork, focusing on achieving the correct sag measurement based on rider weight and fork travel. It provides recommended starting points for air pressure and detailed instructions for adjusting rebound and compression damping for different riding conditions.

What's inside

  • Suggested Sag Measurements
  • Sag Setting
  • Rebound Adjustment
  • Compression Adjustments
  • Installing the Front Wheel
  • QR Wheel Installation
  • Kabolt Installation
  • Adjust the Lever Position

Specifications

Maximum Air Pressure120 psi
Sag Range15–20% of total fork travel
QR Axle Sizes15x100 mm and 15x110 mm
Kabolt Axle Torque17 Nm (150 in-lb)
Lever Tension Torque0.90 Nm (8 in-lb)

Frequently asked questions

What is the recommended sag range for the FOX 36 FLOAT?

The sag range should be set to 15–20% of total fork travel.

How do I adjust the rebound setting?

Turn the rebound knob to the closed position clockwise until it stops, then turn it counter-clockwise to the number of clicks shown in the table based on your air pressure and rider weight.

What is the maximum air pressure for the 36 FLOAT fork?

The maximum air pressure for the 36 FLOAT fork is 120 psi.

Download PDF (632 KB)

More Fox Manuals


View all Fox manuals →