FOX Floating Forks Tuning Guide and Installation Instructions

This document introduces the tuning guide for FOX floating forks, which mainly includes the tuning methods of compression damping, rebound damping, air pressure, and the precautions for tuning.


FOX Floating Forks Tuning Guide and Installation Instructions - cover page
Brand
Fox
Document type
User Manual
Language
English
Pages
11
File format
PDF
File size
794 KB
Published
15 October, 2023
Updated
15 October, 2023
MD5 checksum
5E938D65A41AA305C747D5D7F38C210F

About this manual

This document provides suggested starting points for adjusting the air pressure and sag on FOX floating suspension forks based on rider weight. It details how to set the 3-position lever (OPEN, MEDIUM, FIRM) and fine-tune compression damping using OPEN mode adjusters or Grip Compression Adjusters depending on the fork series.

The guide also covers installation procedures for Quick Release axles and the KaboltX axle system, including torque specifications. Additionally, it explains how to use the Air Release Button at the rear of each fork leg to release built-up air pressure.

What's inside

  • Suggested Sag Measurements
  • Rebound Adjustment
  • Compression Adjustments
  • Factory Series Grip2 Compression
  • Quick Release Installation
  • Air Release Button
  • KaboltX Installation

Frequently asked questions

What is the recommended sag range for FOX suspension?

The sag range should be set to 15–20% of total fork travel.

What is the maximum air pressure for FOX forks?

The maximum air pressure limit is 140 psi.

What torque specification should be used for the pinch bolt during wheel installation?

Tighten the pinch bolt on the drive side dropout to 5.1 Nm (45 in-lb) torque.

Which models are compatible with the KaboltX axle?

The KaboltX is only compatible with the 2021 36 and 38 forks.

Download PDF (794 KB)

More Fox Manuals


View all Fox manuals →