This manual introduces the use of Fluke i310s AC/DC Current Clamp, including the characteristics, usage methods, precautions, etc.
The Fluke i310s AC/DC Current Clamp is designed for use with oscilloscopes and digital multimeters to perform accurate non-intrusive measurements of AC, DC, and complex waveform currents. Utilizing advanced Hall Effect technology, it measures currents up to 450 A peak over a frequency range of DC to 20 kHz. It is suitable for applications involving inverters, switch mode power supplies, industrial controllers, and automotive diagnostics.
The document provides comprehensive safety instructions, including warnings about hazardous voltages and the need for qualified personnel to operate the device. It details electrical characteristics such as current ranges, accuracy, and bandwidth, along with general characteristics like operating temperature and weight. The guide also covers operating instructions, including zero adjustment, current measurement steps, maintenance, and battery replacement procedures.
| Current Range | 30 A and 300 A ac rms or ± 45 A and 450 A dc |
|---|---|
| Max Output Sensitivity | 10 mV/A (30 A) 1 mV/A (300 A) |
| Accuracy (30 A range) | ± 1 % of reading ± 50 mA |
| Bandwidth | dc to 20 kHz (-3 dB) |
| Power Supply | 9 V Alkaline, NEDA 1604/PP3 IEC 6LR61 |
| Battery Life | 30 hours |
| Maximum Conductor Size | 19 mm (0.748 in) diameter |
| Operating Temperature Range | -10 to +50 °C (14 to +122 °F) |
The device requires a 9 V Alkaline, NEDA 1604/PP3 IEC 6LR61 battery.
The battery life is 30 hours, and a low battery indicator will flash when the voltage is too low.
The clamp can accurately measure currents up to 450 A peak.
Depress the thumbwheel and rotate it to adjust the output voltage to zero, ensuring the clamp is away from the current carrying conductor.