The HB96G six-digit intelligent digital display grating ruler is mainly used for measuring displacement, length, liquid level, etc. It features an internationally universal 96x48x112mm standard chassis and a six-digit 0.56-inch LED digital display. The dual input terminals, Input 1 and Input 2, can recognize pulse encoder signals with a phase difference of 90 degrees. The product is compatible with both level pulse and switch signal inputs. Users can set two control values to achieve dual relay output, control, or alarm. The product allows for the setting of the multiplier to determine the proportional relationship between the input pulse count and the display value. The current count value and set value are not lost in case of power failure. External sensors such as angular and linear displacement gratings can be connected to the product, which provides voltage options of 5V (40mA) and 12V (30mA). The product adopts a disk-mounted card-inserted installation method and is suitable for an operating temperature range of -10℃ to +50℃.
The HB HB96G is a six-digit intelligent digital display grating ruler designed for measuring displacement, length, and liquid levels. It features a standard 96x48x112mm chassis with a 0.56-inch LED display and supports dual input terminals compatible with 90-degree phase pulse encoder signals. The device allows for setting two control values and features two relay outputs for control or alarm functions. This manual is written in Chinese.
| Chassis Size | 96x48x112mm |
|---|---|
| Display Type | 0.56-inch LED |
| Power Supply | AC220V 50Hz |
| Input Resistance | 20K |
| Pulse Frequency | ≤ 10K |
| Ratio Range | 0.001~65.535 |
| Display Range | -199999~+999999 |
| Pulse Width | Minimum 2uS |
| Contact Capacity (AC) | AC220V 3A |
| Contact Capacity (DC) | DC24V 5A |
| Operating Temperature | -10℃~+50℃ |
The device supports external sensors such as angular and linear displacement gratings, providing 5V (40mA) or 12V (30mA) voltage.
Yes, the current count value and set values are not lost during a power failure.
The maximum supported pulse frequency is 10K.
It can be reset by pressing the reset key or by short-circuiting the reset terminal and the common terminal.