Introduces the installation instructions of Pentair Large Stainless Steel Niche (Concrete/Gunite)
This document provides installation guidelines for the Pentair Large Stainless Steel Niche, specifically designed for concrete and gunite pool applications. It covers safety warnings regarding electrical shock, required bonding and grounding procedures, and specific orientation requirements to ensure proper operation of compatible underwater light fixtures.
The guide is divided into sections for USA and Canada installations, detailing differences in electrical code compliance (NEC vs CE), junction box placement distances, and conduit specifications. Key steps include locating the niche on a vertical wall at least 18 inches below the water surface, orienting the pilot screw hole to the 12 o'clock position, and securely bonding the fixture housing to all metallic items within five feet of the pool.
| Compatible Fixtures | Amerlite, AmerQuartz, SAm, IntelliBrite, SunGlow II, and SunBrite II |
|---|---|
| USA Ground Wire Size | No. 8 AWG |
| Canada Ground Wire Size | NO. 6 AWG |
| USA Minimum Depth | 18 inches below water surface |
| Canada Maximum Depth | 600 mm below water surface |
| Junction Box Distance (Canada) | 3 m or more from edge |
This niche is designed for use only with Pentair Water Pool and Spa wet niche light fixtures, specifically Amerlite, AmerQuartz, SAm, IntelliBrite, SunGlow II, and SunBrite II.
The niche must be oriented so that the pilot screw hole is at the 12 o'clock position to ensure proper bonding.
USA installations require a No. 8 AWG ground connector located at the rear of the niche.
Canada installations require a No. 6 AWG ground connector located at the rear of the niche.