This document is a user manual for the Wireless Transmitter WT-3. It provides information about the features and characteristics of the product.
This manual covers safety precautions, regulatory notices, and handling instructions for the Nikon WT-3A wireless transmitter. It explains battery handling, exposure warnings, and FCC/IC compliance requirements before the device is used.
The guide then walks through installation, configuration of the WT-3 Setup Utility, supported operating modes (Host, PC, Print, PD‑10), network setup, image transfer procedures, and troubleshooting. Technical specifications such as wireless standards, frequency, range, data rates, power consumption, and physical dimensions are listed at the end.
| Wireless Standards | IEEE 802.11b/g |
|---|---|
| Operating Frequency (WT‑3A) | 2412–2462 MHz |
| Data Rates (IEEE 802.11g) | 6‑54 Mbps |
| Security | TKIP, AES, 128/64‑bit |
| Ethernet Standards | IEEE 802.3u (100 base‑TX) / IEEE 802.3 (10 base‑TX) |
| Power Consumption | 3.5 W maximum |
| Weight | 295 g / 10.4 oz |
| Dimensions (W × H × D) | 152 mm × 110 mm × 72.5 mm |
Do not immerse the device in water, keep it dry, avoid wet hands, and disconnect power immediately if smoke or an unusual smell appears.
The WT‑3 supports Host (wireless/Ethernet upload), PC (camera control), Print (printing via network or PD‑10 adapter), and Wireless‑only modes.
The device consumes up to 3.5 W of power.
Approximately 1,600 shots without the WT‑3, 1,000 shots with wireless, and 1,100 shots with Ethernet under test conditions.