The user manual for the W10000/W9000 Digital Projector Home Cinema Series provides information on the features and characteristics of the product.
This manual introduces the BenQ W10000/W9000 Digital Projector, covering safety and regulatory information, unpacking contents, and basic setup such as battery installation for the remote control and positioning guidelines. Detailed sections explain how to connect video sources, adjust image size and quality, and use the on‑screen menus.
Additional chapters cover maintenance tasks like lamp replacement, cleaning the filter, troubleshooting common problems, and a full list of technical specifications for dimensions, power, and performance. The document is intended for end‑users installing and operating the projector in a home‑cinema environment.
| Dimensions (with cover) | 492 x 195 x 444 mm (W x H x D) |
|---|---|
| Dimensions (without cover) | 492 x 195 x 393 mm (W x H x D) |
| Weight | 20.9 lbs / 9.5 kg |
| Power consumption (max) | 320 W |
| Lamp power | 250 W |
| Projection system | Single‑chip DLP™ system, 0.95" DMD chip |
| Resolution | 1920 x 1080 (DLP 1080) |
| Operating temperature range | 0 °C to 40 °C |
| Operating humidity | 10 % – 90 % (no condensation) |
| Maximum operating altitude | 10 000 ft (≈ 3000 m) |
Allow the projector to cool for at least 45 minutes, remove the lamp cover, loosen the lamp screws, pull out the lamp, insert the new lamp fully, and re‑install the cover.
Check that the power cable is plugged in and the power switch is on, ensure the cooling process has finished, and verify the lamp cover is securely attached.
Turn the projector on, go to Setup → Lamp → Reset Lamp Timer menu, and confirm the reset.