This document is a technical manual for the BW-1101 product. It introduces the features and characteristics of the product, including the product's operation, functions, parameters, etc.
This manual covers all aspects of using the Kolin BW-1101 washing machine, including component identification, control panel functions, safety guidelines, installation steps, water inlet and drain connections, grounding, and basic maintenance. It also contains a detailed specification table and a list of service stations.
Safety precautions, proper installation on a level floor, and troubleshooting tips are provided to help users avoid common problems and ensure reliable operation of the machine. This manual is written in Chinese.
| Voltage / Frequency | ~110V / 60Hz |
|---|---|
| Rated Power Consumption | 550W |
| Dimensions (W x H x D) | 630 x 1010 x 670 mm |
| Net Weight | 47 kg |
| Standard Water Consumption per Cycle | 250 L |
| Water Use per Level | High 97L, Medium 77L, Low 62L, Small 36L |
| Operating Water Pressure | 29.4 kPa – 784.5 kPa |
| Wash Mode | Dual wash mode (bubble + rotating drum) |
Verify that the power is on, the plug is properly inserted, the fuse is intact, the power switch is on, the pause key is not engaged, and that there is sufficient water in the drum.
Separate the fixing bracket from the inlet hose, loosen the four screws on the bracket, attach the bracket to the faucet, push it firmly to seal the rubber gasket, tighten the screws, then connect the inlet hose to the bracket and to the machine’s inlet.
After the machine is placed, insert the silent anti‑mouse base into the slot on the front bottom of the machine with the “UP” side facing up, then push it down until it locks in place.