This manual covers everything needed to install and use the Sampo WMA-D158V front‑load washing machine. It includes step‑by‑step installation instructions, detailed descriptions of the control panel, all washing programs, and guidance for cleaning and maintenance.
Safety warnings, emergency procedures, fault codes, and a full specification table are also provided to help users operate the machine safely and efficiently. This manual is written in Chinese.
| Power supply | 110V/60Hz |
|---|---|
| Water pressure | 0.03–0.8 MPa (0.3–8 kgf/cm²) |
| Standard water volume | 95 L (high water level) |
| Standard water usage | 285 L (standard cycle) |
| Dimensions (W×D×H) | 642 × 700 × 1055 mm |
Turn the adjustment foot clockwise to raise the machine, or counter‑clockwise to lower it, then ensure all four feet are firmly in contact with the floor.
E1 means the machine cannot fill water after pressing the start/pause button; check that the water tap is open, water supply is not stopped, and the inlet filter is not blocked.
Pull the filter frame upward to remove the filter, flip it inside‑out, rinse it in water to remove lint, then reinstall it by reversing the steps.