This manual mainly introduces the method of building Linux development environment based on ARMSYS2410 development kit and application program development method, including hardware environment construction, software environment construction, Linux kernel burning into ARMSYS2410, file system update, application program development and download, etc.
This manual explains how to set up the hardware and software environment for the ARMSYS2410 board, including installing the cross‑compiler toolchain, configuring the kernel, and preparing the root file system. It also covers serial port setup, JTAG bootloader flashing, and network communication via Ethernet.
Additional sections provide example programs, driver resources, and network services such as Telnet, FTP, and a built‑in web server that can control the board’s LEDs. The document assumes a Red Hat Linux 9.0 host environment. This manual is written in Chinese.
| Serial port baud rate | 115200 8N1 |
|---|---|
| LED flash mode 1 period | 1 second |
| LED flash mode 3 period | 0.25 second |
Run /etc/rc.d/init.d/httpd start to launch the web server.
Connect the PC parallel port to the JTAG board with a 20‑pin ribbon cable and use the JTAG interface as described in section 4 to program the bootloader.