CN2510 Series Quick Installation Guide, introduces the hardware and software features of CN2510 Async Server, including indicator lights and buttons, panel rear interfaces, LCM display panel operation, etc.
This guide introduces the Moxa CN2510 Async Server, a communication server with 8 or 16 asynchronous RS‑232 ports and a single 10/100 Mbps Ethernet port. It lists the package contents, describes the hardware front‑panel indicators, LCM display panel operation, and the required cables and accessories.
Installation steps cover hardware mounting, power connection (AC 100‑240 V or DC 12‑48 V), grounding, network link LEDs, device and console connections, and basic software setup. The document also includes pin assignments, cable wiring diagrams, and environmental specifications such as power consumption, temperature range, and dimensions. This manual is written in Chinese.
| Power Input (DC) | 12‑48 VDC |
|---|---|
| Power Consumption | 235 mA @100 V, 145 mA @240 V, 250 mA @48 V |
| Operating Temperature | 0 °C to 55 °C |
| Operating Humidity | 5 % to 95 % RH |
| Dimensions (with ears) | 190 × 44.5 × 478 mm |
| Serial Line Protection | 15 kV ESD |
| Magnetic Isolation (Ethernet) | 1.5 kV |
| Power Line Protection (Burst) | 4 kV Burst (EFT) |
| Power Line Protection (Surge) | 2 kV Surge |
Press and hold the Reset button for 5 seconds; the Ready LED will flash and you will hear two beeps, after which the device returns to factory defaults.
The CN2510 can be powered from an AC source of 100‑240 V, 47‑63 Hz or from a DC source of 12‑48 V.
You can use a terminal emulator via the console RJ45 port or telnet to the device’s IP address from a Windows PC.