PNL-RC is a dedicated remote controller for Honeywell 23 series and other alarm hosts, supports remote control distance of 100 meters/50 meters in open areas, and consists of a remote receiver and remote controller. The remote controller buttons are used for learning (dual button control), arming, disarming and emergency alarm.
The PNL‑RC alarm remote, designed for Honeywell 23 series alarm panels, consists of a compact receiver and a four‑button controller for learning, arm, disarm and emergency alarm functions. It supports up to 15 remote controllers and a wireless range of 100 m outdoors or 50 m indoors.
The manual details how to install the receiver inside or outside the alarm panel, connect it to the panel’s data and key lines, power options (DC 12 V or shared with the panel), and the procedures for pairing, learning, and using the remote controller, including indicator meanings and safety notes. This manual is written in Chinese.
| Maximum supported controllers | 15 |
|---|---|
| Operating temperature | 0 ~ 50 °C |
| Operating humidity | 0 ~ 80 % |
| Weight | Receiver ~80 g, Controller ~15 g |
Open the receiver housing, press its white button, then press any button on the controller; the receiver’s red LED will flash for 2 seconds to indicate successful pairing.
Press the D and C buttons simultaneously; both the arm and disarm LEDs will flash, indicating the receiver has entered learning mode.
A single receiver can support up to fifteen remote controllers.